 |
|
 |
 |
 Water-Repellents
Water-repellents and water-repellent preservatives may be applied to cedar used above ground. These formulations reduce water absorption in the short term. The addition of a fungicide that inhibits the growth of mildew and decay fungi will further increase wood's durability.
A low-wax-content water-repellent preservative applied to newly-milled cedar as a single-coat pre-treatment before painting may help reduce discoloration caused by bleeding of water-soluble extractives.
Semi-Transparent Stains
Semi-transparent stains may be latex or oil-based. The semi-transparent nature of the stain, due to its low solids content, does not block all ultraviolet radiation and some will reach the wood's surface. Latex stains do not penetrate the surface and are not as durable.
 |
| |
Natural appearance and protection from moisture are advantages provided by penetrating pigmented stains. Semi-transparent stains are more durable than transparent finishes. |
|
Caution
Transparent, non-flexible, film-forming finishes such as lacquer, shellac, urethane, and varnish are not recommended for exterior use on cedar. Ultraviolet radiation can penetrate the transparent film and degrade the wood. Regardless of the number of coats, the finish will eventually become brittle, develop severe cracks and then fail. |
|
|
|
| |
|
|
| |
|
|
| |
 |
Members of the Western Red Cedar Export Association provide western red cedar to Belgium, France, The Netherlands, United Kingdom, Australia, New Zealand, China, Japan and other markets around the world. |
|
|
| |
|
|
| |
|
|
|
|
|
